B-ONE TEMPERATURE AND HUMIDITY TESTER CLIMATIC CHAMBER

B-ONE TEMPERATURE AND HUMIDITY TESTER CLIMATIC CHAMBER

B-ONE Temperature and Humidity Tester – Climatic Chamber

Models: THC-100 A/B, THC-150 A/B, THC-250 A/B, THC-500 A/B

The B-ONE Climatic Chamber is designed to test and maintain specific temperature and humidity conditions, ideal for industries and research that require precise environmental controls.

Key Specifications

Capacity Options

Available in different capacities to cater to various testing needs:

• THC-100: 100 Liters
• THC-150: 150 Liters
• THC-250: 250 Liters
• THC-500: 500 Liters

Temperature Control

• Temperature Range:
  • Model A: -20°C to 150°C
  • Model B: -40°C to 150°C
• Temperature Fluctuation: ±0.5°C
• Temperature Deviation: ±2°C
• Heating Rate: 1 – 3°C per minute
• Cooling Rate: 0.7 – 1°C per minute
• Temperature Accuracy Range: 0.1°C

Humidity Control

• Humidity Range: 30% to 98% Relative Humidity (RH)
• Humidity Deviation: ±3% RH
• Humidity Accuracy: 1% RH

Controller

Equipped with a 7-inch High-Definition, True Color LCD Touch Screen, providing an intuitive interface for setting and monitoring conditions.

Heating and Humidification Systems

• Heating System: Uses Nichrome Electric Heating for efficient heat distribution.
• Humidification System: External isolation type with a stainless steel, shallow surface evaporative humidifier for even moisture control.
• Dehumidification System: Utilizes an evaporator coil for dew point temperature laminar flow contact dehumidification.

Water Supply

• Water Management: Automatic water supply with a recycling system to conserve water and minimize waste.

Refrigeration and Air Circulation

• Refrigeration System: Air-cooled compressor for consistent cooling.
• Circulation System: Uses a temperature-resistant, low-noise motor and multi-lobe centrifugal wind turbine for even airflow.

Safety Features

Provides comprehensive protection features, including:

• Protection Against: Leakage, short circuit, over-temperature, water shortage, motor overheating, compressor over-pressure, overload, and over-current.
• Power Failure Controller: Maintains data and settings in case of power interruption.

Construction and Materials

• Inner Chamber Material: Mirror-finish stainless steel 304 for durability and easy cleaning.
• External Material: Carbon steel with phosphating electrostatic spray coating for rust resistance.
• Insulation Material: Polyurethane rigid foam for effective thermal insulation.
• Door Frame Insulation: Double-layered silicone rubber seal resistant to high and low temperatures, ensuring airtight closure.

Timer

• Programmable Timer: 0 to 9999 minutes for customized testing durations.

Voltage and Power

• Voltage: 380V, 50Hz across all models
• Power: 380VAC, 50Hz for THC-100, THC-150, THC-250, THC-500

Dimensions

• Internal Dimensions (W x D x H):
  • THC-100: 500 x 400 x 500 mm
  • THC-150: 500 x 500 x 600 mm
  • THC-250: 600 x 550 x 750 mm
  • THC-500: 800 x 800 x 800 mm
• External Dimensions (W x D x H):
  • THC-100: 700 x 1320 x 1620 mm
  • THC-150: 700 x 1480 x 1720 mm
  • THC-250: 800 x 1480 x 1850 mm
  • THC-500: 1000 x 1450 x 1780 mm

Applications

The B-ONE Climatic Chamber is suitable for a range of industrial and scientific applications where precise environmental control is essential, including:

• Pharmaceutical Testing
• Material Stress Testing
• Electronics and Device Testing
• Environmental Studies