Memmert Incubators Im IF750mplus

Memmert Incubator Im IF750mplus – Precision, Safety, and Efficiency in One Unit

The Memmert IF750mplus is a high-performance Class I medical incubator designed for demanding laboratory and clinical applications. With advanced forced air circulation, dual-display control, and a large 749-liter chamber, this unit offers exceptional temperature accuracy, flexible control features, and enhanced safety. It is ideal for laboratories where reliability, sterilization, and process consistency are essential.

Key Features

• TwinDISPLAY with two high-resolution TFT color displays

• Adaptive PID microprocessor control with intuitive navigation

• Forced air circulation with two quiet, individually adjustable turbines

• HeatBALANCE for flexible upper/lower heat distribution (-50% to +50%)

• SetpointWAIT ensures process timing begins only after reaching target temperature

• Built-in 4-hour/160°C sterilization program (for chamber only)

• AutoSAFETY system with automatic over/under temperature monitoring

• Visual and acoustic alarms for maximum operational security

• AtmoCONTROL software for programming and data transfer via USB or Ethernet

• Reinforced stainless steel chamber with four-sided heating

• Lockable castors for mobile setup

Applications

• Medical laboratories and diagnostics

• Incubation of cell cultures, microbiological samples, and tissue engineering

• Clinical research and pharmaceutical quality testing

• Sample storage requiring controlled conditions

• Environments requiring periodic chamber sterilization

Specifications

• Temperature setting range: +20 °C to +80 °C

• Working temperature range: minimum 10 °C above ambient to +80 °C

• Temperature setting accuracy: 0.1 °C

• Temperature sensors: 2 Pt100 DIN Class A sensors in 4-wire circuit (mutual monitoring)

• Timer: digital countdown from 1 minute to 99 days

• Calibration: 3 freely selectable temperature values

• Adjustable parameters: temperature (°C or °F), fan speed, air flap, time zones, summer/winter time

• Sterilization program: 4 hours at 160 °C (chamber only)

Ventilation and Air Management

• Convection: forced air circulation

• Fans: 2 quiet air turbines, adjustable in 10% steps

• Fresh air: electronically regulated pre-heated admixture

• Vent: outlet with restrictor flap

Control & Programming

• Control system: TwinDISPLAY with digital PID controller

• Programming: via AtmoCONTROL software on USB stick or Ethernet

• Power-failure safety: programme memory retention

Safety Features

• Temperature limiter TB: mechanical, DIN 12880 Class 1

• Overtemperature monitor TWW or adjustable limiter TWB (selectable)

• AutoSAFETY ASF system: automatic temperature tolerance monitoring

• Visual and acoustic alarms

• Autodiagnostic fault analysis system

Construction & Design

• Chamber volume: 749 liters

• Internal dimensions (W x H x D): 1040 x 1200 x 600 mm (depth minus 39 mm for fan)

• Maximum number of shelves: 14

• Max chamber load: 300 kg

• Max shelf load: 30 kg

• Internal material: easy-to-clean stainless steel with deep-drawn ribbing

• Heating: integrated, protected large-area heating on all four sides

• Doors: inner glass door and outer insulated stainless steel door with 2-point locking

• Casing: textured stainless steel

• Rear housing: zinc-plated steel

• External dimensions (W x H x D): 1224 x 1720 x 784 mm (+56 mm for door handle)

• Installation: mobile on lockable castors

Electrical Data

• Voltage (230 V model): 230 V, 50/60 Hz, approx. 2000 W

• Voltage (115 V model): 115 V, 50/60 Hz, approx. 1800 W

Environmental and Setup Requirements

• Ambient temperature: +5 °C to +40 °C

• Relative humidity: max. 80%, non-condensing

• Maximum installation altitude: 2000 m above sea level

• Overvoltage category: II

• Pollution degree: 2

• Installation clearance: rear 15 cm, ceiling 20 cm, sides 5 cm