Memmert Steriliser S SN30

Memmert Steriliser SN30

Reliable Hot Air Sterilisation for Laboratory Use

The Memmert SN30 hot air steriliser is designed for the safe and effective sterilisation of laboratory instruments and materials. Certified as a Class I medical device (CE 0197), it ensures full compliance with medical standards. Its precise temperature control and integrated safety features make it an essential tool in any clinical or laboratory setting.

Key Features

• SingleDISPLAY controller with high-definition TFT screen for clear parameter setting

• SetpointWAIT function ensures sterilisation only starts when the target temperature is reached

• Natural convection with electronically controlled air flap for efficient heat distribution

• High-temperature sterilisation up to 250 °C

• Auto-diagnostic system and overtemperature protection ensure safe operation

Applications

• Sterilisation of laboratory glassware and instruments

• Suitable for medical, pharmaceutical, and microbiological labs

• Ideal for clinics, hospitals, and research institutions

• Use cases requiring dry sterilisation instead of chemical disinfection

Specifications

• Temperature range from +20 °C to +250 °C

• Working temperature at least 5 °C above ambient

• Temperature setting accuracy: 0.1 °C up to 99.9 °C, 0.5 °C from 100 °C

• 1 Pt100 temperature sensor (DIN Class A, 4-wire circuit)

• Timer adjustable from 1 minute to 99 days

• Adjustable parameters: temperature (°C/°F), air flap, program time, time zones

• Natural convection system with electronically adjustable air flap

• Air vent with restrictor flap

• Program memory retained during power failure

• Communication via Ethernet interface (AtmoCONTROL software available)

• Safety includes electronic overtemperature monitor and mechanical limiter TB

• AutoSAFETY diagnostics and alarm system for process reliability

• Stainless steel interior with large-area heating on four sides

• Chamber volume: 32 litres

• Internal dimensions: 400 x 320 x 250 mm

• Maximum of 3 stainless steel shelves

• Max chamber load: 60 kg

• Max shelf load: 20 kg

• External dimensions: 585 x 704 x 434 mm (plus 56 mm for door handle)

• Housing made of textured stainless steel and zinc-plated rear steel panel

• Electrical load: approx. 1600 W at 230 V or 115 V, 50/60 Hz

• Ambient operating conditions: +5 °C to +40 °C, max. 80% rh (non-condensing)

• Installation altitude: up to 2,000 m above sea level

• Overvoltage category II, pollution degree 2

• Transport upright only

• Shipping dimensions: approx. 660 x 890 x 650 mm

• Net weight: approx. 46 kg

• Gross weight: approx. 62 kg

• Country of origin: Germany

• Customs tariff number: 8419 8998

• WEEE Reg. No.: DE 66812464