Standgas HC Pro detector explosive gases Duran Electronica

Standgas HC Pro Explosive Gas Detector – Duran Electronica

High-performance stand-alone detector for flammable gas monitoring

The Standgas HC Pro detector explosive gases Duran Electronica is a stand-alone explosive gas detector designed to provide reliable detection and early warning of a wide range of flammable gases. Featuring catalytic sensor technology and microprocessor-based control, it offers accurate measurements with high sensitivity across its entire detection range of 0 to 100% L.E.L. The unit is equipped with programmable relay outputs, easy gas selection, and IP65-rated housing for use in demanding environments.

This detector is particularly well-suited for safety-critical areas where the risk of gas leaks could lead to hazardous conditions, such as industrial kitchens, laboratories, petrol stations, and boiler rooms.

Key features

• Stand-alone operation: Fully functional without the need for a control panel

• Wide detection range: Measures explosive gases from 0 to 100% L.E.L.

• Multiple gas options: Automatically detects from a wide list of gases using jumper-based configuration

• Special version: Available for acetylene detection

• Optical indicators: Status and sensor fault indicators visible on device

• Programmable relay output: Includes two alarm thresholds (20% and 50% L.E.L.) with options for delayed or instant activation

• Encapsulated components: Separate encapsulation of sensor and compensator for improved linearity and stability

• Factory calibrated: Delivered pre-calibrated with the target gas, eliminating the need for recalibration during installation

• Maintenance friendly: Annual maintenance recommended; designed for quick checks and servicing

• Durable housing: IP65 protection grade with robust Makrolon and ABS materials

Applications

• Battery rooms

• University and pharmaceutical laboratories

• Aircraft manufacturing facilities

• Underground galleries and distilleries

• Livestock farming

• Petrol and service stations

• Boiler rooms and industrial kitchens

• General industrial environments

Specifications

• Sensor technology: Catalytic with microprocessor

• Voltage supply: 10V to 24V DC (2-wire)

• Power consumption: 110 mA at 12V DC

• Detection range: 0 to 100% L.E.L.

• Resolution: ±1% L.E.L.

• Zero deviation: ±7 mV per year

• Span deviation: ±9% L.E.L. per year

• Stabilization time: Less than 15 minutes

• Response time: T50 < 3 s, T90 < 8 s

• Sensor life: Approximately 4 years under normal use

• Recommended maintenance: Annually

• Humidity range: 0 to 90% RH, non-condensing

• Temperature range: -10°C to +50°C

• Atmospheric pressure: 80 to 110 kPa

• Alarm output: Dry contact relay, 3A 250V AC

• Coverage area: Approximately 16 m²

• Protection grade: IP65

• Dimensions: 120 x 160 x 60 mm

• Weight: 288 g

Detected gases include

Methane (CH₄), hydrogen (H₂), methanol, ethane, ethanol, ethylene, propane, propylene, acetone, ammonia, cyclohexane, cyclopentane, dioxane, ethyl acetate, isopropyl alcohol, methyl ethyl ketone, butane, hexane, pentane, propanol, butyl acetate, iso-octane, heptane, toluene, xylene, benzene, kerosene, acetic acid, decane, isobutyl alcohol, nonane, styrene, and methyl isobutyl ketone.

The Standgas HC Pro ensures dependable gas detection across a broad array of environments and gases, helping maintain safety and compliance wherever flammable gases are present.